Other Hardware
Comprehensive Engineering Master Catalog
Other Hardware
Supporting Product LineBolts & Nuts
Galvanized structural bolts, lag screws, eye bolts, turnbuckles, bolt assemblies, and washers engineered for electrical transmission and distribution poleline construction.
Square Head Machine Bolts
Grade 2 square head machine bolts, hot dip galvanized. Available in 1/2", 5/8" and 3/4" diameters, lengths from 2" up to 28".
Hex Head Bolts
Full-thread hex head bolts, available in black finish and hot dip galvanized, 1/2" diameter, 1" to 1-1/2" lengths.
Carriage Bolts
Round head, square neck carriage bolts complete with nut. Available in 3/8" and 5/8" diameters, 5" to 6" lengths.
Lag Bolts
Hex head and gimlet point lag bolts, hot dip galvanized. Available in 1/4", 5/16", 3/8", 1/2" and 5/8" diameters, 2-1/2" to 8" lengths.

Oval, Shoulder & Thimble Eye Bolts
Oval eye, shoulder eye and thimble eye bolts for insulator and guy wire attachment. Available in 5/8" and 3/4" diameters, 6" to 18" lengths.
Angle Thimble Eye Bolts
Angled thimble eye bolts for guy wire and anchor terminations. Available in 5/8" diameter, 12" to 16" lengths.

Double Arming Bolts
Extra-long square head bolts for double crossarm assembly, hot dip galvanized. Available in 5/8" and 3/4" diameters, 16" to 24" lengths.
Spool Bolts
Spool bolts for secondary rack and spool insulator mounting. Available in 5/8" diameter, 10" to 14" lengths.
Turnbuckles
Eye-eye, clevis-clevis and clevis-eye turnbuckles for guy wire tensioning. Available in 5/8" diameter, 6" and 12" take-up.
Threaded Rod
Fully threaded rod stock, hot dip galvanized. Available in 3/4" diameter x 36" length.
Bolt, Washer & Nut Assemblies
Pre-assembled bolts complete with washer and nut for fast field installation. Available in 1/2" diameter, 1-1/4" to 3" lengths.
J-Drive Hook
5" J drive hook with 7/16" x 2" fetter thread, hot dip galvanized, for pole-mounted equipment support.
Washers

Square & Curved Washers
Malleable square and curved washers for crossarm bolting. Available in 2" to 4" sizes with 11/16" to 7/8" hole diameters.
Belleville Washers
Conical spring washers for maintaining bolt tension under load. Available in 1/2" size.
Lock & Round Washers
2" lock washer and round flat washer, galvanized, 13/16" hole diameter.
Anchors & Rods
Ground anchors, screw and expansion anchors, PISA hub systems, anchor rods, plates, and installation tooling engineered for guying and structural anchoring on transmission and distribution polelines.
Helix & Screw-In Anchors
Double helix and no-wrench screw-in anchors for direct-drive installation without pilot hole. Available in 6", 8" and 10" helix diameters, 1" and 3/4" shaft, up to 86" length.
PISA Hub Anchors & Rods
Power-installed screw anchors with hub connection, plus matching PISA rod stock. Available in 8", 10" and 12" hub sizes with 1-3/8" and 1-1/2" fittings, rods from 3-1/2' to 7'.
Expansion Anchors
Multi-blade expansion anchors that open into undisturbed soil for high holding capacity. Available in 8" (8-way), 10" and 12" sizes.

High Strength Anchors
Reinforced plate anchors rated for elevated holding capacity in demanding soil conditions. Available in 8", 10" and 12" sizes.
Rock Anchors
Threaded rock anchors and extensions for grouted installation in bedrock and shallow-soil sites. Available in 1" diameter, 12" and 18" lengths, with 3/4" x 3' extensions.
Double & Triple Thimble Eye Anchor Rods
Hot dip galvanized anchor rods with double or triple thimble eye ends for guy wire attachment. Available in 5/8", 3/4" and 1" diameters, 3' to 8' lengths.
Anchor Plates
Square steel bearing plates for load distribution on rod-set and grouted anchors. Available in 20"x20", 21"x21" and 24"x24" sizes, black finish.

PISA Eye Nuts & Rod Couplers
Single, twin and triple eye PISA nuts plus 1" rod couplers for extending and terminating anchor rods. Available in 3/4" and 1" thread.
Kelly Bar Adapters, Drive Tubes & Locking Dogs
Hex Kelly bar adapters, drive tube assemblies, and locking dog hardware for powered anchor installation. Available in 2" and 2-1/2" hex.
Pole Mount Tri-Anchor & Template
Three-leg pole mount anchor system with matching installation template for guy-free pole stabilization.
Buckles & Banding
Stainless Steel Banding
Type 201 stainless steel banding strap for pole, conduit and cable strapping applications. Available in 1/4", 3/8", 1/2", 5/8" and 3/4" widths, sold by the 100' coil, box or c/w dispenser tote.
Banding Buckles
Stainless steel banding buckles and wing buckles sized to match 1/4" through 3/4" strap widths. Sold 100 per box.
Free End Clamps
Band-It free end clamps for securing banding terminations without buckles. Sold 100 per box.
Centre Punch Clamps
Centre punch clamps for banding installation, available in 2" galvanized carbon steel and stainless steel finishes.
Centre Punch Tools
Hand-operated centre punch tools for crimping banding clamps, sized for 3/8" through 5/8" strap.
Banding Tools & Replacement Parts
Band-It banding tools rated to 2400+ lbs tension capacity, plus replacement thrust bearings, tension assemblies and cutter bar kits.
Cable Support & Lashing Straps
Stainless steel cable support and lashing straps for aerial cable and strand attachment. Available in 10" and 16" lengths.
Sign Brackets
Flared and straight leg sign brackets, complete with mounting bolts and washers, for pole-mounted signage. Also available as tapered-leg bracket blanks, 50 per box.
Porcelain Insulator
Standoff Insulators (Glastic)
Glastic standoff insulators for crossarm and equipment mounting where composite construction is preferred over porcelain.
Screw Knob & T-Hook Insulators
Porcelain screw knob insulators and T-hook insulators for secondary and low-voltage conductor support.
Suspension Insulators
ANSI 52-4 suspension insulator units for overhead line suspension assemblies.

Spool Insulators
ANSI 53.1 and 53.2 spool insulators for secondary rack and service conductor support.

Strain Insulators
ANSI 54 series strain insulators in small, medium, and large ratings for guy strand and deadend strain applications.
Pin Insulators
ANSI 55 and 56 series pin-type porcelain insulators from 7.8kV through 34.5kV, plus the Hendrix 35kV polymer pin insulator.
Cap & Pin Insulators
Cap and pin disc insulators rated 23kV and 34.5kV with 150kV and 200kV BIL for transmission-class strings.
Station Post Insulators
Porcelain station post insulators from 35kV to 69kV in 18" to 30" heights for substation and switch support.
Bus Bar & Slip Ring Insulators
15kV bus bar support insulators and slip ring insulators for switchgear and rotating equipment applications.
Armourlite Insulators
Line Post Insulators
Armourlite horizontal and vertical line post insulators, plus universal-mount versions, rated 15KV through 46KV.

Dead End Insulators
Armourlite dead end insulators rated 15KV through 46KV for deadending distribution conductor at structures.
Station Post & Suspension Insulators
Epoxy station post insulator rated 15KV, and a 52-5/CS-5 suspension insulator unit for overhead line support.
Triplex Stand-Off & Link Hardware
Triplex stand-off insulator with integral retainer, and insulator link stick hardware for service conductor support.
Wildlife & Bird Protection
Wildlife protectors for equipment covers, and the Sylvania Birdstop streetlight saver for deterring birds.
Guy Wire & Lashing Wire

Guy Strand Wire
Galvanized guy strand wire in Grade 110, Grade 180, and EHS classifications. Available in 1/4", 5/16", 3/8" and 1/2" diameters, on coils and reels.
Copper Wire & Grounding Cable
Bare and insulated copper ground wire, flexible grounding cable with clear or yellow jacket, and copper clad steel wire for grounding and bonding.
Lashing Wire
Stainless steel and galvanized lashing wire, plus lashing wire deployment tube, for securing cable to messenger strand in aerial construction.
ACSR, Triplex & Tie Wire
ACSR overhead primary wire, triplex aluminum wire, and aluminum tie wire for overhead distribution conductor applications.
Winch Cable
Wire rope winch cable complete with hook or eye termination, for poleline rigging and pulling operations.
Misc. Wire & Accessories
Supplementary wire products including TEW building wire and threaded rod stock.
Preforms
Preformed line products for conductor deadending, guy strand termination, splicing, armoring, and grip applications, color-coded by wire size for fast field identification.
Triplex & Service Drop Preforms
Color-coded preformed grips for triplex and service drop cable, sized #6 through 4/0 and 2/0 service. Colors: blue, orange, red, yellow, green by conductor size.
ACSR Conductor Deadends
Preformed helical deadend grips for ACSR conductor, sized 1/0 through 556 ACSR, including 336 and 4/0 configurations.

Guy Grip Deadends
Preformed guy grip deadends for galvanized guy strand terminations. Color-coded, available in 3/16", 1/4", 3/8", 5/16" and 1/2" strand sizes.
Staggered Guy Deadends
Staggered-leg preformed deadends for improved grip distribution on guy strand. Available in 1/4", 5/16" and 3/8" sizes, black and yellow.

Strand Splices
Preformed splice sleeves for joining galvanized steel guy strand end-to-end. Available in 1/4" and 5/16" strand sizes.
Armor Rods
Preformed armor rods that wrap around conductor at support points to reduce vibration fatigue and abrasion. Available for 1.017"-1.035" and 1192 AAC conductor.
Conductor & Copper Grips
Preformed pulling and support grips for conductor and copper strand, including 7/8 strand copper grip. Available in 1/2" blue.
Cadwelds & Gelpack

Cadweld Exothermic Welding Kits & Accessories
Exothermic welding material, ignitor control units, one-shot Cadweld molds, strikers and ground-to-steel kits for permanent molecular bonding of grounding connections.

Gelpack Covers
Protective moisture-sealing covers for Gelpack splicing enclosures, sized for large and standard splice housings.
WEJTAP Connectors & Covers
Burndy WEJTAP compression tap connectors for joining copper and aluminum conductors of varying sizes, plus matching protective covers.
Power Booster Shells
Color-coded Burndy Power Booster shells for connector identification, sized small through large.
Stirrups & Dead End Clamps
Burndy stirrup connectors and secondary dead end clamps for conductor support and termination applications.
Compression Lugs
Copper and copper/aluminum compression lugs in single-hole, 2-hole and 4-hole NEMA configurations, tin plated where noted, for termination of ground and conductor wire.
Splices, Taps & Grounding Connectors
Full-tension copper splices, compression C-tap connectors, ACSR sleeves, and pipe grounding connectors for conductor joining and grounding applications.
Misc. Hardware

Guy Thimbles & Hooks
Guy thimbles and guy hooks for terminating and mounting guy strand at anchor rods and pole attachment points.

Guy Wire Clamps
2-bolt and 3-bolt guy wire clamps in 1/4" through 3/4" sizes for securing guy strand terminations.
Guy Strut Fittings
Guy strut pole plates and fitting caps for anchoring guy struts to poles under 2-1/2" and 3-wire configurations.
Guy Spreaders & Sleeves
Complete guy spreader assemblies and guy serve sleeves for multi-wire guying configurations.
Steel Cable Guards
Straight steel cable guards from 3/4" to 4-1/4", protecting riser and crossarm cable runs from abrasion.

Aluminum Cable Guards
Lightweight aluminum cable guards from 1-1/4" to 4-1/4" for the same protection with better corrosion resistance.
Flared Cable Guards
Flared-end steel and aluminum cable guards for smooth cable transitions at riser and mast entry points.
Throat Clips
Aluminum throat clips in 2-1/4" to 3-3/4" for securing cable guard sections in place.
Crossarms
Wood, steel, hollow steel, and fiberglass deadend crossarms for primary line construction.
Crossarm Braces
34" and 36" crossarm braces for reinforcing crossarm-to-pole connections.
Crossarm Pins & Insulator Brackets
Threaded steel crossarm pins and angle insulator mounting brackets for crossarm-mounted insulators.
Pole Top Pins
Threaded pole top pins in 18" and 24" lengths, plus angle-top and short-shank variants.
Pole Top Brackets
Galvanized pole top mounting brackets and pole top extension brackets for insulator and hardware attachment.
Ground Rods
Copper and galvanized steel ground rods in 3/4" diameter, 6', 8', and 10' lengths.
Ground Plates & Gradient Mats
10"x16" ground plates and 6'x4' gradient mats, with and without connectors.
Ground Connectors & Bonding Clamps
Bronze bonding clamps, ground rod connectors, steel-to-steel ground clamps, and pole grounding discs.
Secondary Racks
Spool racks and mast racks for secondary conductor and service drop support, sized 100A to 200A.
Clevis Hardware
Double straight, twisted, single-point channel, spool, flat, thimble-eye clevises, and yoke strain plate.
Suspension Clamps
3-bolt straight and angle suspension clamps, plus curved messenger clamps.
Bear Paw Messenger Clamps
Bear paw style messenger clamps for neutral conductor support on concrete or steel structures.
Swing-Away & Deadend Clamps
2-bolt swing-away clamps for #6-2/0 ACSR and side-opening deadend clamps for #4-556 conductor range.
Figure-8 Span Clamps
Figure-8 profile span clamps, straight and twisted 90 degree, for aerial cable crossovers.
Drop Wire Clamps & Hooks
B-drop wire clamps, wire drop hooks, and wedge-type drop wire clamps.
Span & Lashing Clamps
Lashing clamps, Q-span drop clamps, aluminum crossover span clamps, and multi-drop span clamps.
Triplex Spreaders (With Insulator)
Triplex spreader hardware with insulator included, plus the insulator-only replacement part.
Triplex Spreader Bracket Hardware
Triplex spreader brackets and bolt kits without insulator, in 10", 12" and 14" configurations.
Triplex Stand-Off & Secondary Spreaders
Triplex stand-off bracket assemblies and Hendrix-style secondary spreader brackets.
Stand-Off Side Post Brackets
9" and 18" stand-off side post brackets, including the raised side plate variant.
TTC Wall & Unistrut Mount Brackets
TTC bracket line for wall mounting and unistrut mounting applications, standard and galvanized.
TTC Double-End, Dead-End & Anchor Brackets
TTC double-end brackets, single dead-end brackets, and auger anchor brackets.
Cutout & Switch Brackets
Single-phase switch and cutout mounting brackets, plus the 14-4kV 100A overhead pole-top cutout.
Arrester Brackets (General)
Lightning arrestor brackets, switch/arrestor combination brackets, and transformer tank arrester mounts.
3-Phase Arrester & Switch Brackets
Three-phase intermediate arrester brackets, distribution cutout/arrester equipment mounts, and 3-phase switch brackets.
Transformer & Meter Hardware
Heavy-duty transformer mounting adaptors, 100A meter socket jumper bars, and meter disconnect sleeve sockets.

Eye Nuts
Oval and thimble eye nuts in 5/8" and 3/4" for guy strand and rigging attachment.
Strain Eyes & Eyebolts
Angle strain eyes and Crosby-rated eyebolts for high-load rigging and guy attachment points.

D-Ring Bolt Eyes
Bolt eye D-rings in two hole sizes for hardware and rigging attachment.
Kellems Grips
Woven-mesh Kellems-style support and pulling grips for cable strain relief.
Platforms & Enclosures
Hot-dip galvanized pole platforms, heavy-duty enclosures, and handwell covers.
Banding & Support Brackets
Banding brackets, epoxy rod drop lead rest brackets, anti-rotation bars, pole thrust fittings, jumper holding studs.
Riserway & Cable Positioning
Single riserway channel, cable positioners, plastic cable spacers, and the ball socket tongue fitting.
Switch Accessories
Single-phase switch brackets, VBM vacuum switch plugs, and related switchgear accessory hardware.
Pigtail Connectors
NEMA-style and 350 MCM pigtail connectors for transformer and equipment lead connections.
Corner Brackets & Flag Arms
Corner mounting brackets and hi-level flag arm (flagram) hardware.
Cable Support & Lashing Straps
Cable support and lashing straps for securing communications and messenger cable to strand.
